Two-Way Normally Open Solenoid Valve For Nuclear Service

Steve Gatcomb, Nuclear & Power Director Of Sales

Valcor Engineering Corporation

In the highly specialized world of nuclear fluid control components, three critical requirements stand out:

• – Suitability for Service
• – Outstanding Dependability
• – Exceptional Performance

Valves designed to handle radioactive fluids must meet rigorous design and code requirements in order to qualify for use in such demanding applications. Trying to use or modify an existing design may lead to frustration, multiple re-designs and failure. Like trying to use a soda straw as a golf tee during a PGA tournament, it just doesn’t work! A fresh, clean-sheet approach addressing the specific application requirements is best served in these applications.

Recently, Valcor Engineering’s Nuclear and Power group received a request for the design of a two-way, normally open solenoid valve that could operate in such an application. The engineers at Valcor, relying on nearly 70 years of experience in creating customized valve designs for demanding applications in Nuclear Power, Aircraft, and Aerospace, went to work, and ultimately produced a valve that exceeded the customer’s rigorous expectations.

The application required a two-way, normally open valve that could handle hot, highly radioactive and chemically toxic fluids while submerged in water (to capture any radiation emitting from the process lines and components). The valve had to be completely sealed, with no potential for fugitive emissions during operation, or over time due to degrading elastomeric seals. This required an all-welded pressure vessel to contain the process media, and a solenoid operator that was waterproof (IP68). Further, the valve had to continuously function without maintenance for extended periods of time. The valve has to fail in the open position so as not to jeopardize the critical safety function of the valve or to interrupt the process. A valve failure would put the entire process at risk, requiring the process system to shut down while the failure was addressed.

Valcor Engineering has maintained an ASME N-Stamp certification for over 45 years. This was the critical criteria in the customer’s selection of Valcor to design their valve, as the valve had to be designed and manufactured under the quality assurance program requirements of ASME Section III, and ASME’s B16.34 code.

ASME B16.34 Valves Flanged, Threaded and Welding End applies to new construction. It covers pressure-temperature ratings, dimensions, tolerances, materials, nondestructive examination requirements, testing, and marking for cast, forged, and fabricated flanged, threaded, and welding end and wafer or flangeless valves of steel, nickel-base alloys, and other alloys.

Without this compliance, the valve would not be suitable for this application. Valcor’s experience in designing valves for nuclear power reactors, waste treatment facilities and laboratories enabled the engineers to rely on an extensive library of existing nuclear valve designs to inform them of the best materials, manufacturing processes, and design features to use in the development of the new valve. After much design and review, a new valve emerged from the engineering department.

Controlling radioactive media requires a robust design that can withstand years of service without requiring any maintenance with the ability to function during and after design basis accidents, e.g. earthquakes. The new valve employs an Inconel bellows to enable the solenoid to actuate the valve without concern for corrosive effects to the valve’s magnetic components and premature pressure boundary seal degradation. This design attribute eliminates concerns of fugitive emissions, under high process media temperatures. The design of the custom-made bellows also contributes to extended cycle life (measured in decades) to ensure maximum uptime in operation, resulting in extensive operating life. The poppet seals against a metal seat, ensuring exceptional durability through thousands of actuation cycles. The metal seat also ensures exceptional durability; it will not wear out or leak, even if challenged by contamination in the process fluid.

The resulting valve design exceeds the customer’s requirements, is used in many applications throughout the process system. It will provide years of dependable service in these applications. Iterations of this design could also work for applications in refrigeration, API (active pharmaceutical ingredient) production for biotech and pharma manufacturing, as well as many others.

Do you have a difficult valve application that we can help you with? Valcor Engineering succeeds for people like you. We Do The Hard Stuff!