Part No. V5000 series
|
|
Fuel,
Hydraulic, and Pneumatic Capability
Used on APU, engine start manifolds, and purge manifolds, 2.5
million valves placed into service.
Features:
Extreme reliability, lightweight and compact design.
Uses Valcor's Floating Seal Design.
Specifications:
0-1200 PSI, 1/4" O.D. line, normally closed or open,
flow rates to .185" ESEO. Handles fluids up to 450° F. |
Part No. V14500-193 |
|
MD-11
Firewall Shut off Valve for APU
Features:
Normally closed solenoid valve includes position indication and redundant external seals.
Specifications:
Designed for high flow with minimum pressure drop.
60 PSIG fuel, 2.5 GPM, less than 0.5 PSID pressure drop.
|
Part No. V2500-17 |
|
Operates
Pilot Valve on Aircraft ECS System
Features:
Rugged magnetic latch. No mechanical latching parts to wear. High speed operation. Compact
design.
Specifications:
.055" stroke, 2.5 to 5 lbs. minimum holding force with no current in either extended
or retracted position.
Ambient temperature to 350° F. |
Part No. V44700-252
|
|
Modulating
APU Bleed Shut off Valve,
Anti-Ice Hot Gas Valve
Features:
Multiple venturi design for high flow capacity and short stroke. High temperature
capability utilizing highly reliable Valcor Floating Seal Design. Stainless steel body,
regulated output pressure, and features position indication.
Specifications:
Up to 300 PSI, line sizes of 1/2" up to 2-1/2" OD line, flow rates to 1100 SCFM.
Handles 900° F inlet gases. Regulator capable to set point ±2 PSIG.
|
