METERING PUMP
PLASTIC PUMP
Dispensing / Metering Pump :
The Valcor solenoid operated Metering pumps are a positive displacement devices in which the effects of fluid pressure, density and viscosity are minimized, because the flow rate is almost entirely dependent on the volume displaced by the piston during each stroke and on the number of strokes per unit time. These pumps thus provide flow accuracies greater than those of conventional pumps or flow valves, especially at low flow rates, and are useful in many precision metering and dispensing application, particularly those that either require of tolerate pulse flow.
Our Dispensing Pumps / Metering Pump product lines feature all Stainless Steel construction SV500, SV515, SV525, SV560 as well as a line of Diaphragm Isolated pumps SV603, SV653, SV673. Valcor also has an all Teflon® pump offering SV104.
Valcor offers the following features in our Pump line:
|
• |
All Stainless
Steel as well as Diaphragm Isolated (fully chemically inert) pump
product lines. |
|
|---|---|---|
• |
Seal materials include Viton, EPDM, and Teflon®. | |
| • |
Positive Displacement; Self Priming |
|
• |
Single and Multiple Stroke Capability. |
|
• |
Precisely Adjustable Volume per Stroke. |
|
| • |
Volumes from .003 cm^3 to 1.5 cm^3 per Stroke. |
|
• |
Volumetric rates up to 180 cm^3/minute. |
|
• |
Pumping Accuracy: ± 2% |
|
• |
Stainless
Steel construction with EPDM or Viton seals |
|
|---|---|---|
• |
Output/Stroke: 100 to 1250 ul. | |
• |
||
» |
• |
Stainless
Steel construction with EPDM or Viton seals |
|
|---|---|---|
• |
Output/Stroke: 3 to 15 ul | |
• |
Maximum
Dispensing Rate: 4.5 cc/minute |
|
» |
• |
Stainless
Steel construction with EPDM or Viton seals |
|
|---|---|---|
• |
Output/Stroke: 10 to 40 ul. | |
• |
Maximum
Dispensing Rate: 12 cc/minute |
|
» |
• |
Stainless
Steel construction with EPDM or Viton seals |
|
|---|---|---|
• |
Output/Stroke: 35 to 350 ul. | |
• |
||
» |
• |
Polypropylene
and Glass construction with EPDM or Viton seals |
|
|---|---|---|
• |
Output/Stroke: 100 to 1500 ul (AC pumps); 100 to 1200 ul (DC pumps) | |
• |
Maximum Dispensing Rate: 180 cc/minute (AC pumps): 144 cc/minute (DC pumps) | |
» |
• |
Polypropylene
and Glass construction with EPDM or Viton seals |
|
|---|---|---|
• |
Output/Stroke: 50 to 350 ul | |
• |
Maximum Dispensing Rate: 120 cc/minute | |
» |
• |
Polypropylene
and Glass construction with EPDM or Viton seals |
|
|---|---|---|
• |
Output/Stroke: 100 to 1500 ul | |
• |
Maximum Dispensing Rate: 90 cc/minute | |
» |
• |
All
Teflon® Construction |
|
|---|---|---|
• |
Output Range: 100-800 ml per minute | |
• |
Variable flow adjustment | |
» |