Manufacturers of solenoid valve, cryogenic valve, metering pump, plastic pump, dispensing pump, Teflon valve, pinch valve, miniature valve, plastic valve and Stainless steel valves.
CRYOGENIC SERVICE SOLENOID VALVES

Cryogenic Solenoid Valve


Valcor Engineering Corporation, one of the largest producers of cryogenic solenoid valves for the aerospace industry, presents our line of commercial cryogenic solenoid valves for your industrial application.   Valcor’s cryogenic solenoid line is broken up into two distinctive designs.  Our SV91 series employs Valcor patented shear seal design which is a gate type design allowing optimal flow rate through the valve with minimal turbulence.  This design offers tremendous advantage in size and power consumption for such applications as high volume cryogenic transfer, thermal chambers, and bleed valve.   Our second product group is our SV95 and SV97 series.  These are poppet style valves used for high cycle application.  These valves employ Valcor proprietary constant load Teflon or PFA seal disk that insures bubble tight shut off.
Valcor offers the following features in our Cryogenic line:
  • Suitable for liquid CO2, liquid methane, liquid oxygen, liquid nitrogen, liquid hydrogen, and liquid Helium.
  • Normally open and normally closed models available.
  • Fluid temperature range from –450°F to 400°F (model dependant).
  • All Stainless Steel welded construction.
  • SV91 high flow/high pressure venturi models available- consult factory for details.
  • Customized solutions are our specialty
If you need a customized solution for your application please Contact Us or fill out an online Application Data Form and our application engineers will get right on it.
cryogenic valve, metering pump, plastic pump, dispensing pump, Teflon valve, pinch valve, miniature valve, plastic valve, Stainless steel valves and Steam valves.
PRODUCT OVERVIEW
Normally Closed Valves
SV91 series
•
  
Stainless Steel welded construction with Teflon seal disk.
•
   Fluid temperature range from –452°F to 450°F .
•
  
Normally open or normally closed.
•
   Pressures up to 1000 prig with Cv up to 2.7.
»
   Click here for SV91 series Technical Data Sheet .
 
SV95 series
 
•
  
Brass construction with Teflon or PFA poppet assembly.
•
   Fluid temperature down to –345°F.
•
   Normally closed .
•
   Pressures up to 1000 psig with Cv up to .71.
•
  
Bubble tight shut off.
»
   Click here for SV95 Technical Data Sheet.
 
SV97 series
 
•
  
Stainless Steel welded construction with Teflon or PFA poppet assembly.
•
   Fluid temperature down to –345°F.
•
   Normally closed.
•
   Pressures up to 1000 psig with Cv up to .8.
•
   Bubble tight shut off.
»
  

Home |  Solenoid Valve |  Diaphragm Valve  | Pinch Valve| Dispensing Pump| Inert Valve| Metering pump